亚洲欧美另类在线图片区,欧美综合天天夜夜久久,亚洲 欧美 动漫 少妇 自拍,无码中文字幕AV免费放软件

The ribbon mixer can mix many different types or different materials to achieve various industrial purposes. Do you know the specific steps in the mixing process? What other factors will affect the quality of the mixture? These questions are introduced.

First, the mixer operation process

1. Some materials with poor fluency or content less than 5% should be pre-mixed first, and the general time is about 15 minutes. When premixing, the ratio of material to carrier to be premixed is 1:5-10.

2. After the premixing work, add other main materials and starch, and let the mixer run for about 15 minutes.

3. If the materials to be mixed do not need to be premixed, the mixing time should be longer, and it can be mixed for about 20 minutes.

4. Different materials have different mixing time requirements. The uniformity of the mixture can be checked regularly to find the optimum mixing time for different materials.

5. Regularly add gear oil to the gearbox and replace the operation of the gear oil mixer.

Second, the factors affecting the quality of mixing

The process of mixing is actually a process of merging, diffusing, shearing, etc. of materials. All the factors that affect these processes will affect the quality of the mixture.

1, the impact of the model

Convection mixing is the operation of moving materials from one place to another. It is used to mix coarse and lumpy materials. This mixing method is faster, so the mixer is mainly used in this mixing mode. The mixing speed is faster.

The diffusion-based mixer has a slower mixing speed, but the advantage is that the mixing effect of the material is relatively large. Simply put, the mixture is relatively more detailed.

2, the impact of the mixture

The different properties of the mixture also affect the quality of the mixture. If materials with relatively small differences in physical properties are to be mixed, the quality of the mixture will naturally be better and will not be easily separated after mixing. Conversely, the larger the difference, the worse the mixing effect.

3. The impact of the operation

The operator's operation on the mixing will also affect the quality of the material, such as the order of the feed, etc., first put the larger material into the first, and add some trace materials to make the mixing effect better.

The above is a description of the mixed process and factors affecting the quality of the mix. Is it helpful for you? If you have any need for a ribbon mixer, please click on the official website to find out more!